Pleasure Paradox Product Logo

BALL GAGS
For Collars, Cuffs and other items we sell Click Here


Round Hole Ball gag
Medical Grade Silicone Round Hole Balls starting at $20.

This Ball is available in only one size at this time a 50mm diameter ball.

Measurements for Straps for ball gags:

The straps are made to order, the default size fits most people, but will have 7 or 9 holes depending on buckle. Custom straps will usually have 3 to 5 holes.
To measure, we recommend using a piece of thick string or yarn and measuring all the way around the head where the strap will go with the mouth open and then laying the string down onto a ruler to determine the needed strap length.



Measurements for balls for ball gags:

(with the caveat this is only a recommendation):


Ball diameter should not exceed open mouth Height measurement by more then 1/8th of an inch. Best is the diameter is at or below open mouth height. (measure bottom of top teeth to top of bottom teeth wide open)

Reduce size if the gagee might have any jaw problems





 
TPP-SR-BG011R50

Medical Grade Silicone BALL GAGS - Round Hole Balls


This page is for the Round Hole style ball for Ball gags.

Other balls and Ball gags are available from this page:
TPP-SR-BG0001 Main ball gag Page

At this time and for the foreseeable future there is only one size, which is a 50mm diameter ball. We are using metric for the round hole balls for confusion avoidance.

Current colors in stock are red and black.


Bunni with Round Hole Ball and Scarf Bunni with Round Hole Ball and Scarf
Round Hole Ball Gag on Bunni using scarf as the strap, click for larger image

Please NOTE: If you want more then one ball gag at a time or a custom color of leather strap, please email  sales@pleasureparadox.com

They are also available on our Etsy Site,
https://www.etsy.com/listing/477775289/50mm-round-hole-ball-for-ball-gag

The balls are designed using an FDA approved medical grade (class VI) silicone material. The softness/squishiness has been optimized for human use. These are actually a touch softer than our other balls because they were designed to work with a wooden dowel in a bit and ball combination. They go very well however with scarfs, rope, leather, or any other material that can be put through the 3/4" diameter hole.

The ridges within the hole are designed to both reduce wear and tear on the outer edge of the ball as well in the case of the eventual bit and ball make it easier to put a 3/4" dowel in place, while still holding it securely in place.


SAFETY NOTE: Always use the ball with a strap of some kind through it to prevent it getting lodged in the throat and always make sure the person gagged is not left alone.


We recommend that Gags should be one person items only and thus we sell them "AS IS".  Because if it does not fit through no fault of ours, we can not take them back.

Any implied warranty of merchantability or fitness is for use as a ball with a buckled strap as a ball gag in the mouth between consenting adult humans for duration not to exceed 1 hour, with open nasal passages (no illness or other medical issues) in the presence of another attentive human and the ball purchased fits comfortably in the mouth with no jaw complaints. The leather (or other material) strap should be checked before each use to make sure it is free of tears and is cabable of pulling the ball from the mouth if needed.


Pricing:

Price  Size                      Size code
$20    50mm   (2")         (R50)


# = Color selection (see below for code)

Available colors/sizes:
K=Black      
R=Red         



USA Shipping ONLY, for international, please use my Etsy Site
https://www.etsy.com/shop/PleasureParadox




RED
(Does not come with scarf)
NOTE: Shipping price is based on USA, send email for non-USA customers.

BLACK (Does not come with rope)




   

     More Background:
The balls are made in the U.S.A. specifically for Longwatcher and thus Pleasure Paradox.  When we lost our original source we had looked for balls that met our standards so we could provide custom straps allowing for a set that is matching in every part. No source we fully trusted was available, so we found a medical parts company in the USA willing to make them to our specifications.

Cleaning:
The ball itself can be cleaned in boiling water or using rubbing or isopropyl alcohol. The alcohol is recommended for routine cleaning. The leather strap however has to be treated as any leather product is, but since the strap can be removed it makes it easy to treat separately.

Sterilization:
The ball itself can be medically sterilized in an autoclave, in an oven at up to 550 degrees F (only greater than 275 degrees F is suggested), soaked in bleach,  boiled in water or soaked in rubbing or isopropyl alcohol. The ball may yellow slightly or get harder over time and repeated heat treatments will speed this process up slightly, but to date (over decades of use) no chemical breakdown has been noted (meaning the balls should remain safe to use for decades. The balls use an FDA approved medical grade material in the manufacture and no chemicals are added that affect their medical grade qualities. Note though that the balls are not shipped sterile and are likely to  have been handled during packaging.

Trivia:
- K for black and M for Purple are used because CMYK is a photographer's term, which Longwatcher is and M=Magenta, which Purple is closest to Magenta and K is for Black or the black/white intensity value.
     


Notes on multiple balls:
For folks interested in ordering the balls by themselves in quantity let me know by email: Longwatcher@Pleasureparadox.com or longwatcher@longwatcher.net

Restraints  Spreader Bar  Impliments  Accessories  Misc 
Previous  Ordering  Home  Contact  Next 

Even More Images:

 

 

 



This page TPP Enterprises, LLC
Original images captured and 2006-2016
This page created and last updated by Longwatcher for Pleasure Paradox
Last updated 25 Oct 2016, 1150 EST